GPM Racing 4140 Carbon Steel + 7075-T6 Alloy Servo Link & Front Steering Link Set for Vanquish 1/10 H10 Optic Kit (H1016224)

Upgrade Kit for Steering Precision

This replacement link set is an RC-scale upgrade designed for VANQUISH H10 OPTIC models, combining 4140 carbon steel contact points with CNC-machined 7075-T6 alloy components for a balance of durability and low weight. It directly replaces the factory plastic servo link and front steering link to reduce slop and improve steering feedback without changing chassis geometry.

Parts arrive pre-assembled where applicable, and the kit includes the fasteners required for a direct swap. For secure installation use a medium-strength threadlocker on metal-to-metal screw joints, and avoid over-torquing to prevent stress on links and ball studs. Check movement through the full steering throw before finalising setup.

On-track tuning role: replacing stock plastic links with stiffer metal components tightens steering response and helps maintain repeatable toe and Ackermann under load, which is useful when dialing in sharper turn-in or firmer front-end feel.

Packing includes

• Front Steering Link Set - 1pcs
• Grade 12.9 Black Flat Head Screws 2.5x8mm - 2pcs
• Grade 12.9 Black Round Head Screws 3x10mm - 2pcs
• Grade 12.9 Black Round Head Screws 3x16mm - 2pcs
• Grade 12.9 Black Cap Head Screws 2x8mm - 4pcs
• Servo Steering Link - 1pcs

Compatible Models

• VANQUISH PRODUCTS 1/10 H10 OPTIC KIT-VPS09027
• VANQUISH PRODUCTS 1/10 H10 Optic Yokohama RTR-VPS09010A
• VANQUISH PRODUCTS 1/10 H10 Optic Sparco RTR-VPS09010B

This link set is a direct-fit RC upgrade for H10 OPTIC kits and RTRs, intended to improve steering precision and component longevity when installed with correct fastener torque and threadlocker.

Does this replace both the servo link and front steering link?

Yes, it is designed to replace the factory plastic servo link and the front steering link on compatible VANQUISH H10 OPTIC models.

What are the main materials used in this kit?

The kit uses 4140 carbon steel at load points and CNC-machined 7075-T6 aluminium alloy for the main link components to achieve strength and reduced weight.

Any fitment or assembly advice?

Fit with the supplied fasteners, use medium-strength threadlocker on metal screws, and do not over-tighten to avoid stress on ball studs. Check steering for smooth operation after assembly.

Will this change my car's steering geometry?

No. The set is made for direct fit and is not intended to alter chassis geometry, though it will reduce flex compared to stock plastic parts. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.