GPM Racing 4140 Carbon Steel Adjustable Front Steering Toe Links 185-190mm for Traxxas 1/6 4WD XRT 8S-78086-4 (XRT162S)

Adjustable front toe links for XRT platforms

This aftermarket front steering toe link set is an RC-scale replacement designed for TRAXXAS XRT platforms. Machined from 4140 carbon steel, the rod body is specified at 8 mm thickness for increased wear resistance compared with typical plastic links. Both ends are adjustable to set center-to-center length between 185 mm and 190 mm to fine-tune toe and steering geometry.

Use these links when replacing factory part number 7897 on compatible XRT builds. The links are intended to transfer steering input from the servo to the steering knuckles and play a role in toe stability, steering response, and bump steer control; adjust lengths incrementally while testing steering feel on the ground to find the desired balance between responsiveness and straight-line stability.

Note: this part is specified for TRAXXAS 1/6 XRT 8S (78086-4), TRAXXAS 1/6 XRT Ultimate 8S (78097-4), and TRAXXAS X-MAXX Wide kit(#7895). It is not suitable for standard X-MAXX configurations, check your chassis kit and part numbers before installing.

Compatible Models

• TRAXXAS 1/6 4WD XRT 8S-78086-4
• TRAXXAS 1/6 XRT Ultimate 8S-78097-4
• TRAXXAS X-MAXX Wide kit(#7895)

Install using matching rod ends and secure hardware, verify steering centring after fitment, and re-check for interference with suspension travel before running at speed.

How is the 185-190mm measurement defined?

The measurement is the adjustable center-to-center span between the internal mounting points of the toe link, used to fine-tune toe angle.

Can this substitute factory part 7897?

Yes, it is intended as a replacement for factory part number 7897 on the models listed in the compatibility section.

Will additional hardware be required?

Confirm the thread type and ball-end compatibility in your kit; rod ends are required at both ends and metal fasteners should be secured with thread locker where applicable.

Are these suitable for standard X-MAXX cars?

No. These parts are specified for the X-MAXX Wide kit and the TRAXXAS XRT models listed and are not compatible with standard X-MAXX setups. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.