GPM Racing Aluminium 7075-T6 Chassis Plate with Servo Mount+Battery Compartment+Motor Base for Traxxas 1/8 4WD Sledge Monster Truck-95076-4 (SLE1612638C)

Structural 7075-T6 upgrade plate for 1/8 Sledge

The SLE1612638C replacement chassis plate is machined from 7075-T6 aluminium and integrates an internal servo mount, battery compartment and quick-release motor base into one replacement assembly for 1/8 scale 4WD Sledge-format monster trucks. A 4.0mm plate thickness, reinforced 5mm edges and a center anti-bend groove reduce deflection while using standard mounting locations.

The package includes a carbon-fibre battery panel fixed by an aluminium 7075-T6 strip, an open Velcro retention scheme for varied battery footprints, and a quick-release motor base with accomodation for 3mm or 4mm motor shafts. An aluminium radio box is supplied to protect the receiver from dirt and moisture. A complete set of fasteners is provided.

Packing includes

• Chassis plate - 1pcs
• Aluminium 7075-T6 fixing strip - 1pcs
• Carbon fibre battery panel - 1pcs
• Square buckle velcro - 2pcs
• Velcro - 1pcs
• Servo mount - 1pcs
• Flat Head screw 4*10 - 5pcs
• Flat Head screw 3*10 - 6pcs
• Flat Head screw 3*6 - 1pcs
• Round Head screw 3x12 - 4pcs
• Differential & motor mount - 6pcs
• Stainless steel flat head screw 4x12 - 5pcs
• Stainless Steel flat head screw 3x14 - 2pcs
• Stainless Steel flat head screw 3x8 - 4pcs
• Stainless steel round head screw 4x12 - 2pcs
• Stainless steel round head screw 4x10 - 4pcs
• Stainless steel round head screw 3x8 - 2pcs
• Stainless steel cap head screws 4*16 - 2pcs
• Stainless steel cap head screws 3*12 - 1pcs
• Stainless steel washer 1*4*8 - 2pcs
• Stainless steel washer 1*3*6 - 1pcs
• Radio box - 1pcs
• Grade 12.9 black cap head screws 2.5x8 - 3pcs
• Grade 12.9 black flat head screw 3x8 - 2pcs
• Screw shaft 3x5 - 1pcs
• Rubber sealing ring - 1pcs

Original Name / Part No:

9522,9626,9584,AR320422

Specifications

• Material: Aluminium 7075-T6 plate and fixing strips; carbon fibre battery panel
• Chassis thickness: 4.0mm (upgraded from standard thickness)
• Edge reinforcement: 5mm reinforced edges with center groove to reduce bending
• Motor mount: Quick-release motor base; motor hole provision for 3mm / 4mm shafts
• Battery retention: Open Velcro design with carbon fibre panel and aluminium fixing strip
• Servo mount: Integrated aluminium 7075-T6 servo mounting area
• Radio box: Aluminium enclosure to protect receiver from dirt and moisture
• Scale/vehicle: 1/8 4WD monster truck
• Hardware: Complete set of stainless and grade 12.9 screws included and pre-installed where specified

Compatible Models

• Traxxas 1/8 4WD Sledge (95076-4)

SLE1612638C brings servo, battery and motor mounts into a single rigid 7075-T6 assembly to stiffen the chassis and provide repeatable mounting positions for easier setup and maintenance.

How precise are the mounting holes compared to stock?

Mounting holes are produced to match common stock patterns used by Sledge-style 1/8 frames, but we recommend a trial fit to confirm exact alignment before final assembly.

Can I use different motor sizes with the quick-release base?

The motor base supports 3mm and 4mm shafts and is suitable for a range of through-bolted motor mounting configurations; confirm your motor bracket matches the hole spacing.

What is the best way to secure varied battery footprints?

Use the carbon-fibre panel and aluminium fixing strip as the anchor point and reposition the Velcro straps to match the length and width of your battery pack.

Are replacement hardware parts standard sizes?

Yes. The screws and washers follow common hobby sizes detailed in the packing list, so replacement parts can be sourced using those specifications.

Does the plate require any break-in or bedding in?

No special break-in is required; once installed and torqued to correct values, the plate provides immediate improvements in stiffness and mounting stability. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.