GPM Racing Aluminium F&r Upper+Lower Arms+F&r Adjustable CVD Drive Shaft+Aluminum 7075-T6 Hex Adapter+Wheel Lock+Stainless Steel Adjustable Front Steering Tie Rod (Widening Kit) for Traxxas 1/10 MAXX
✓ In stock, ready to dispatch
Aluminium F&r Upper+Lower Arms+F&r Adjustable CVD Drive Shaft+Aluminum 7075-T6 Hex Adapter+Wheel Lock+Stainless Steel Adjustable Front Steering Tie Rod (Widening Kit) by GPM Racing for the Traxxas 1/10 MAXX. Part number TXMS100N. Available in Blue, Black, Green, Grey Silver, Orange, Red, Silver.
Free UK delivery over £129.99 · Next-day dispatch before 3pm
Description
CNC-inspired widening arms and CVD reinforcement
The GPM TXMS100N is engineered as a widening and reinforcement kit for TRAXXAS 1/10 4WD MAXX monster trucks, delivering a matched set of front and rear upper and lower arms plus adjustable CVD drive shafts. The assembly is intended to push the wheel track outwards by 20mm per side, improving lateral stability while the thicker 8mm axles and hardened joint inserts help maintain driveline integrity under increased loads.
Engineering notes: main structural components are produced from 6061 T6 aluminium for an optimal strength-to-weight compromise, with delrin collars and 4mm delrin shims included to control play and ensure consistent fitment. Fastening uses pin retention with small screws to limit thread wear, while multiple damper mounting locations provide setup flexibility. Hardened steel joint inserts work with alloy bodies; axle diameter has been increased from 6mm to 8mm to improve torsional capacity. Bearings sized for the larger axles are supplied to match the upgrade.
Packing includes
- Upper arms - 4pcs
- Lower arms - 4pcs
- CVD - 4pcs
- Aluminium 7075-T6 hex adapter - 4pcs
- Aluminium 7075-T6 wheel lock - 4pcs
- Turnbuckle - 2pcs
- Stainless steel pin 4x33 - 4pcs
- Stainless steel pin 4x43 - 4pcs
- Stainless steel flat head screw 3x8 - 12pcs
- Stainless steel washer 3m - 12pcs
- Stainless steel pin 4x38.5 - 4pcs
- Stainless steel pin 4x63.5 - 4pcs
- White delrin shim 4mm - 2pcs
- Stainless steel round head screw 3x20 - 2pcs
- Stainless steel round head screw 3x18 - 6pcs
- Set screws 5x5 - 4pcs
- 8x16x5 bearing - 4pcs
- 2.5x14.8 Pin - 4pcs
- M4x2.5x17 Screw pin - 4pcs
Original Name / Part No:
8929+8930+8950+8956+8948
Compatible Models
- TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
- TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4
For technical hobbyists seeking a robust widening upgrade, TXMS100N pairs aluminium arms with reinforced CVDs and precision hardware to widen the MAXX track while preserving drivetrain strength for demanding use.
What tolerances are addressed by the kit to prevent slop?
Delrin collars and 4mm delrin shims are supplied to correct mating tolerances, and pin retention with small screws is used to reduce thread wear and maintain consistent joint positioning.
How does axle size change affect load capacity?
Increasing axle diameter from 6mm to 8mm increases cross sectional area and torsional stiffness, which improves durability under higher torque and lateral loads.
Are the hex adapters and wheel locks compatible with standard MAXX hubs?
The kit includes 7075-T6 aluminium hex adapters and wheel locks designed to mate with common MAXX hub patterns; verify hub dimensions and secure with the supplied hardware.
What setup advice do you have after fitting?
After installation re-check camber, toe and damper positions; use the multiple damper mounts to dial roll centre and fine tune for the intended driving surface. Write Product Review Please sign in your account before you can write any review.
Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.
SKU: TXMS100N