
GPM Racing Aluminium Front Adjustable Steering Link & Suspension Link - 8pcs Set for Traxxas 1/10 TRX4 (TRX4161)
✓ In stock, ready to dispatch
Aluminium Front Adjustable Steering Link & Suspension Link – 8pcs Set by GPM Racing for the Traxxas 1/10 TRX4. Part number TRX4161. Available in Blue, Black, Green, Grey Silver, Orange, Red, Silver.
Free UK delivery over £129.99 · Next-day dispatch before 3pm
Description
Precision aluminium steering links for TRX4 applications
This 7-piece aluminium link kit provides a metal replacement for the TRX4 Trail Crawler stock plastic tie rods, offering a stiffer reference for suspension and steering geometry adjustments. Rod bodies are thicker at 6.5mm and finished with anodising to limit surface wear during repeated trail use. Ends use counter-clockwise thread orientation for secure length changes.
Recommended for competent hobbyists performing setup work, the manual specifies the following mechanical values: tie rod diameters increased from original 5mm to 6.5mm, front lower steering tie rod midpoint distance 133.2mm, front upper steering tie rod midpoint distance 77.3mm, rear supportive tie rod midpoint distance 77.6mm. Adjustable rod length allows incremental steering toe and centring corrections without modifying hubs.
Included in the package per the product manual are stainless steel round head screws: 3*25 - 1 pcs, 3*16 - 3 pcs, 3*14 - 1 pcs. Confirm compatibility of link end fittings with your TRX4 steering knuckles and hub carriers before torqueing final fasteners.
What measurable changes come from installing these links?
Upgrading to 6.5mm rods increases section modulus versus the original 5mm parts, reducing deflection under load and providing a more repeatable steering geometry for setup work.
How should I adjust the rods for minimal toe change?
Make symmetric length adjustments with the vehicle on level stands, shorten or lengthen both sides equally, and recheck toe with a centre wheel reference to avoid introducing unintended camber or bump steer.
Are any modifications required to hubs or knuckles?
No machining is typically required; the set is intended to fit standard TRX4 link endpoints. Always verify clearance and endpoint threading before final assembly and use the supplied stainless screws: 3*25 x1, 3*16 x3 and 3*14 x1. Write Product Review Please sign in your account before you can write any review.
Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.
SKU: TRX4161




