Skip to content

Free UK delivery on orders over £129.99

CheapRCCars
GPM Racing Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set for Traxxas 1/7 Unlimited Desert Racer-85076-4 (UDR312FS)
  • GPM Racing Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set for Traxxas 1/7 Unlimited Desert Racer-85076-4 (UDR312FS)
  • GPM Racing Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set for Traxxas 1/7 Unlimited Desert Racer-85076-4 (UDR312FS)
  • GPM Racing Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set for Traxxas 1/7 Unlimited Desert Racer-85076-4 (UDR312FS)
  • GPM Racing Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set for Traxxas 1/7 Unlimited Desert Racer-85076-4 (UDR312FS)
  • GPM Racing Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set for Traxxas 1/7 Unlimited Desert Racer-85076-4 (UDR312FS)

GPM Racing Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set for Traxxas 1/7 Unlimited Desert Racer-85076-4 (UDR312FS)

£19.99

✓ In stock, ready to dispatch

Aluminium Front Sway Bar & Stainless Steel Linkage-10pcs Set by GPM Racing for the Traxxas 1/7 Unlimited Desert Racer-85076-4. Part number UDR312FS. Colour: Green.

Free UK delivery over £129.99 · Next-day dispatch before 3pm

Description

Front sway bar and linkage for TRAXXAS UDR

This front anti-roll kit is engineered for the TRAXXAS UNLIMITED DESERT RACER platform and combines aluminium sway arms with stainless steel link components to enhance front roll control. The assembly is intended to reduce chassis tilt during cornering and to allow straightforward tuning of front stiffness via selectable arm positions.

The set includes the following: Front Sway Bar - 2 pcs, Stainless Steel Tie Rod - 2 pcs, Stainless Steel Round Head Screw 3x16 - 4 pcs, Stainless Steel Round Head Screw 3x14 - 2 pcs. Its function is to raise front roll stiffness while preserving original suspension geometry and providing simple adjustability for different surfaces.

Design notes: aluminium arms are used to keep rotating mass low while stainless linkages resist deformation under load. The dual-position holes on each sway arm let you alter tie rod leverage to suit a range of traction conditions. This upgrade installs to the stock front mounting points on the UNLIMITED DESERT RACER chassis.

Specifications

  • Item: Front sway bar & linkage set - 10 pcs
  • Material: Aluminium and stainless steel
  • Model Number: UDR312FS
  • Compatibility: TRAXXAS UNLIMITED DESERT RACER

Fit the kit, begin with the softer arm location and progress to the stiffer position while evaluating handling changes with measured test runs to identify optimal front roll balance.

What is the recommended method to evaluate arm positions?

Perform controlled runs using the same battery and track section, note understeer or oversteer changes, then move the tie rod position and repeat to quantify handling differences.

Will the kit alter the vehicle roll centre?

The kit adjusts roll stiffness without changing suspension geometry; any effective roll centre change is marginal and comes from altered leverage rather than mounting location shifts.

How should I inspect components after impact?

Check link straightness, fastener tightness and sway arm holes for elongation; replace any bent tie rods and verify all screws are torqued to spec before further running.

Does the kit require changes to stock electronics or shocks?

No electrical or shock changes are required; this is a mechanical roll-stiffness upgrade and should be tuned in conjunction with shock settings for best results. Write Product Review Please sign in your account before you can write any review.

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.

SKU: UDR312FS