GPM Racing Aluminium Front Turnbuckle for Steering for Losi 1/6 Super Baja Rey 4x4 (SB162)
✓ In stock, ready to dispatch
Aluminium Front Turnbuckle for Steering by GPM Racing for the Losi 1/6 Super Baja Rey 4×4. Part number SB162. Available in Green, Orange, Red, Silver.
Free UK delivery over £129.99 · Next-day dispatch before 3pm
Description
Engineered aluminium turnbuckles for steering
This 10pcs turnbuckle kit is prepared for Team Losi SUPER BAJA assemblies and referenced as SB162. The design replaces compliant stock links with machined aluminium turnbuckles to lower front end deflection and provide a more consistent steering input under load.
Components are selected to stabilise knuckle alignment and simplify trim adjustments during setup. The documented hardware from the source includes multiple turnbuckles, stainless steel screws in two lengths and 4mm stainless lock nuts, with fitment references LOS251067, LOS255022, LOS254034 cited for verification.
Installation is performed using standard link replacement practice: remove factory links, install the aluminium turnbuckles between steering knuckles and the servo horn linkage, then set and verify symmetric toe and steering travel before final torque. The aluminium construction minimises length change under dynamic load so tuning typically requires fine increments to toe and steering angle after fitment.
Finish options listed in the source include blue, red, grey silver, orange, green, black and brown to match chassis or bodywork aesthetics without altering function.
This item is compatible with
- TEAM LOSI Super BAJA REY 4X4
What hardware is supplied with the SB162 kit?
The kit ships with ten machined turnbuckles, stainless steel round head screws in two lengths and four 4mm stainless lock nuts as listed in the source documentation.
How do these affect steering geometry under load?
Machined aluminium reduces link compliance so steering geometry remains closer to static setup during dynamic loads, improving repeatability. Expect to fine tune toe and steering throw after installation.
Recommended installation practice?
Use appropriate hex drivers and a small spanner for lock nut finalisation, set symmetric toe and steering travel, then confirm there is no binding across full lock range before running. Write Product Review Please sign in your account before you can write any review.
Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.
SKU: SB162