Skip to content

Free UK delivery on orders over £129.99

CheapRCCars
GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM)
  • GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM)
  • GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM)
  • GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM)
  • GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM)
  • GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM)

GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM)

£6.99

✓ In stock, ready to dispatch

Aluminium Hex Adapters 7mm Thick-12pcs Set by GPM Racing for the Traxxas 1/10 Ford GT 4-Tec 2.0. Part number GT010/12X7MM. Available in Blue, Black, Green, Grey Silver, Orange, Red.

Free UK delivery over £129.99 · Next-day dispatch before 3pm

Description

Precision 7mm hex adapters for GT4 chassis tuning

This 7mm hex adapter set is engineered for TRAXXAS 4WD GT4 TEC 2.0 installations where a tight wheel-to-axle interface is essential. Components are machined from 6061 T6 aluminium and sized to a 7mm hex thickness to match wheel upgrades that demand a thicker mounting face versus the original 6.8mm brake disk thickness.

Designed for axial concentricity and load transfer, the adapters locate on the axle to maintain predictable handling and repeatable wheel positioning. The close tolerance fit reduces radial play that can compromise steering precision and increase tyre degradation during competitive use.

Kit contents supplied for installation and servicing:

  • 2x10 steel pin - 4 pcs
  • 2x5 stainless steel cap head screw - 4 pcs
  • Hex adapters - 12 pcs

Engineering note: confirm clearance against the stock 6.8mm brake disk on GT4 TEC 2.0 hubs before final assembly. These adapters are intended as a performance-oriented tuning component to adjust wheel offset and enhance mechanical engagement without altering core hub geometry.

This item is compatible with

  • TRAXXAS FORD GT4-TEC 2.0

What tolerance should I expect on axle fit?

The adapters are produced to close machining tolerances suitable for standard GT4 TEC 2.0 axles; inspect fit and ream minimally only if clearance varies from expected dimensions.

Are the pins and screws specification grade?

The kit uses hardened steel pins and stainless cap head screws appropriate for wheel retention; replace hardware with equivalent grade parts if higher duty cycles are expected.

Can these adapters be used with offset wheels?

Yes, the 7mm face allows adjustment of effective offset; verify wheel inner profile and hub clearance to ensure correct seating and avoid interference. Write Product Review Please sign in your account before you can write any review.

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.

SKU: GT010/12X7MM

GPM Racing Aluminium Hex Adapters 7mm Thick-12pcs Set for Traxxas 1/10 Ford GT 4-Tec 2.0 (GT010/12X7MM) | Cheap RC Cars