Skip to content

Free UK delivery on orders over £129.99

CheapRCCars
GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025)
  • GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025)
  • GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025)
  • GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025)
  • GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025)
  • GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025)

GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025)

£10.99

✓ In stock, ready to dispatch

Aluminium Servo Horn with Steering Link – 6pcs Set by GPM Racing for the Traxxas 1/10 TRX4. Part number TRX416025. Available in Grey Silver, Orange, Red, Silver.

Free UK delivery over £129.99 · Next-day dispatch before 3pm

Description

Precision aluminium servo horn and steering link for TRX4

This aftermarket aluminium servo horn and steering link kit is specified for TRAXXAS TRX4 Trail Crawler builds and carries the model number TRX416025. The 8 piece set replaces factory plastic components to reduce flex and deliver a more consistent steering response in straight steering arm configurations.

The steering link uses a counter-clockwise threaded tie rod to permit length adjustments without rotating ball end seating, making incremental toe and steering bias changes straightforward. The midpoint between ball ends measures 77.5mm, which is a useful setup datum when aligning geometry or swapping components.

Contents and durability notes: the kit includes stainless steel mounting screws and a lock nut, while the principal parts are aluminium to reduce wear compared with plastic originals. The design targets scale trail crawling where a firmer steering feel and repeatable feedback are required.

Installation and tuning procedure: replace the plastic horn with the aluminium unit using the supplied stainless hardware, verify servo spline alignment before final torque, and adjust length using the CCW tie rod while testing steering centring and travel. This direct-fit upgrade addresses plastic arm weakness and supports more predictable low-speed control for technical crawling.

This item is compatible with

  • TRAXXAS TRX4 Defender Trail Crawler

What is the recommended setup workflow after fitting?

Install the aluminium horn, torque fasteners to a sensible hand-tight setting, centre the servo spline, then use the CCW tie rod to bring steering to neutral. Verify travel and centring under load before final checks.

How should I use the 77.5mm midpoint measurement?

Use the 77.5mm midpoint as a baseline when matching left and right link lengths or when comparing aftermarket components; it helps ensure symmetric steering geometry for predictable handling.

Are the supplied fasteners corrosion resistant?

The kit ships with stainless steel mounting screws and a lock nut to reduce corrosion risk at critical joints; regular maintenance after wet or salty runs is still recommended to preserve fitment. Write Product Review Please sign in your account before you can write any review.

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.

SKU: TRX416025

GPM Racing Aluminium Servo Horn with Steering Link - 6pcs Set for Traxxas 1/10 TRX4 (TRX416025) | Cheap RC Cars