Skip to content

Free UK delivery on orders over £129.99

CheapRCCars
GPM Racing Brass Wheel Hex Adapters 23mm - 20pcs Set for Traxxas 1/10 TRX4 (TRX4010X/23M)
  • GPM Racing Brass Wheel Hex Adapters 23mm - 20pcs Set for Traxxas 1/10 TRX4 (TRX4010X/23M)
  • GPM Racing Brass Wheel Hex Adapters 23mm - 20pcs Set for Traxxas 1/10 TRX4 (TRX4010X/23M)
  • GPM Racing Brass Wheel Hex Adapters 23mm - 20pcs Set for Traxxas 1/10 TRX4 (TRX4010X/23M)
  • GPM Racing Brass Wheel Hex Adapters 23mm - 20pcs Set for Traxxas 1/10 TRX4 (TRX4010X/23M)

GPM Racing Brass Wheel Hex Adapters 23mm - 20pcs Set for Traxxas 1/10 TRX4 (TRX4010X/23M)

£17.49

✓ In stock, ready to dispatch

Brass Wheel Hex Adapters 23mm – 20pcs Set by GPM Racing for the Traxxas 1/10 TRX4. Part number TRX4010X/23M.

Free UK delivery over £129.99 · Next-day dispatch before 3pm

Description

23mm Brass Hex Adapter Technical Overview

This 23mm brass wheel hex adapter set provides a precision-machined brass upgrade for TRAXXAS TRX-4 style trail platforms where increased track width and additional hub mass are required for handling tuning. Each adapter is machined in brass to a 23mm hex dimension, creating a thicker hex profile than standard parts to move wheel offset outward and reduce wheel-to-body gap.

Key hardware included in the kit: Hex Adapter 4pcs, Stainless Steel Screw Shaft M4x2.5x11 4pcs, Shims 5mm 4pcs, 5mm Metal Washer 4pcs, Stainless Steel Hex Socket Screw 20mm 4pcs. Per supplier information the individual adapter mass is approximately 17g each, supplying consistent added weight at each hub for measurable handling effect.

Installation guidance: remove the OEM hex, mount the brass adapter onto the axle, position shims or washers to trim offset as required, and secure with the supplied M4 shafts and 20mm hex socket screws. Verify correct thread engagement and wheel alignment after fitting; the wider hex may necessitate minor wheel trim or spacer variation depending on wheel geometry and tyre clearance.

Tuning considerations: the 23mm profile increases track and unsprung mass at each hub, which typically improves low-speed composure and reduces lateral tip tendencies. Adjust shock damping and spring rate to accommodate the increased hub mass and retain desired suspension response.

Compatible Models

  • TRAXXAS TRX-4 DEFENDER
  • TACTICAL UNIT-82066-4
  • BLAZER 82076-4
  • FORD BRONCO 82046-4
  • MERCEDES-BENZ G500 82096-4

A complete hardware kit designed to widen track and add repeatable hub weight on TRX-4 based trail rigs while maintaining straightforward fitment.

Do these adapters require axle machining for fitment?

They are developed for the compatible TRX-4 hubs listed and typically install without altering axle splines; inspect hub engagement and spline fit before final torque to ensure correct seating.

What is the measured weight of each adapter and how does it affect tuning?

Each adapter is approximately 17g according to supplier notes. The added hub mass shifts unsprung weight and track width, which alters roll characteristics and response speed; adjust valving and spring rates to refine behaviour.

How should brass hardware be maintained in trail conditions?

Brass is corrosion resistant but can tarnish; flush away grit and moisture after runs, dry fully and apply light lubrication where needed. Use threadlocker on steel fasteners if repeated vibration is expected.

Does the kit include everything for a direct swap?

Yes, the kit includes four 23mm hex adapters, M4x2.5x11 stainless shafts, four 5mm shims, four 5mm washers and four 20mm stainless hex socket screws to complete the hub installation. Write Product Review Please sign in your account before you can write any review.

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.

SKU: TRX4010X/23M

GPM Racing Brass Wheel Hex Adapters 23mm - 20pcs Set for Traxxas 1/10 TRX4 (TRX4010X/23M) | Cheap RC Cars