Skip to content

Free UK delivery on orders over £129.99

CheapRCCars
GPM Racing Hard Anodized 7075 Alloy Diff Case and Idler Gear Set (47/29T/0.8m) for Arrma 1/10 Gorgon 4x2 Mega 550 Brushed Monster Truck RTR (MGO1200A)
  • GPM Racing Hard Anodized 7075 Alloy Diff Case and Idler Gear Set (47/29T/0.8m) for Arrma 1/10 Gorgon 4x2 Mega 550 Brushed Monster Truck RTR (MGO1200A)

GPM Racing Hard Anodized 7075 Alloy Diff Case and Idler Gear Set (47/29T/0.8m) for Arrma 1/10 Gorgon 4x2 Mega 550 Brushed Monster Truck RTR (MGO1200A)

£28.99

✓ In stock, ready to dispatch

Hard Anodized 7075 Alloy Diff Case and Idler Gear Set (47/29T/0.8m) by GPM Racing for the Arrma 1/10 Gorgon 4×2 Mega 550 Brushed Monster Truck RTR. Part number MGO1200A. Available in Black, Titanium.

Free UK delivery over £129.99 · Next-day dispatch before 3pm

Description

Aftermarket 7075 diff case and idler gear assembly

This aftermarket assembly replaces ARRMA part ARA311095 and is supplied as a differential case and idler gear set for ARRMA 1/10 monster and stadium platforms. Machined from 7075-T6 aluminium with a hard anodized surface, the components are intended to improve wear resistance and keep gear mesh consistent under hobby driving loads. It fits as a direct replacement where the factory mounting interfaces and 0.8M gear pitch are used; reference MGO1200A when checking compatibility.

The design emphasises gearbox durability and repeatable engagement rather than altering final drive ratios. In practice the set helps limit wear during heavy use and provides a firmer foundation for setup changes elsewhere in the drivetrain. Install following the vehicle differential layout and use the supplied bearings and fasteners to restore the complete unit.

Pack contents

  • Diff Case And Idler Gear Set (47/29T, 0.8M) - 2pcs
  • Bearing 6x15x5 - 2pcs
  • Bearing 12x18x4 - 2pcs
  • Grade 12.9 black Flat Head Screws 3x8 - 4pcs

Original Name / Part No:

ARA311095

Compatible Models

  • ARRMA 1/10 Gorgon 4X2 Mega 550 Brushed Monster Truck RTR-ARA3230S
  • ARRMA 1/10 Gorgon 2WD RTA Kit Brushed Monster Truck-ARA3230SK
  • ARRMA 1/10 Gorgon 4X2 Mega 550 Brushed Monster Truck RTR-ARA3230
  • ARRMA 1/10 Vorteks 2WD Stadium Truck RTR-ARA3205
  • ARRMA 1/10 Vorteks 2WD RTR Brushed Stadium Truck-ARA3205S
  • ARRMA 1/10 Fury Mega 550 2WD Short Course Truck RTR-ARA3221
  • ARRMA 1/10 Fury 2WD RTR Brushed Short Course Truck-ARA3221S
  • ARRMA 1/10 Quake 223S DSC 2WD RTR Brushless Monster Truck-ARA3537
  • ARRMA 1/10 Fury 223S DSC 2WD RTR Brushless Short Course Truck-ARA3521
  • ARRMA 1/10 Vorteks 223S DSC 2WD RTR Brushless Stadium Truck-ARA3505
  • ARRMA 1/10 Freedom Flyer 223S 2WD RTR Brushless Monster Truck-ARA3530S
  • ARRMA 1/10 Gorgon 223S 2WD RTR Brushless Monster Truck-ARA3530

For ARRMA Gorgon and related 1/10 chassis, MGO1200A provides a like-for-like 7075 alloy differential case and idler gear set intended to restore drivetrain durability and consistent gear engagement; follow the vehicle service manual for torque and assembly order when installing the supplied bearings and fasteners.

What should I check before fitting?

Verify the vehicle uses the same mounting interfaces and 0.8M gear pitch as the OEM ARA311095, and confirm reference MGO1200A matches your model before installation.

Are the supplied bearings and screws included?

Yes, the pack includes the bearings (6x15x5 and 12x18x4) and Grade 12.9 black flat head screws 3x8 required to rebuild the differential assembly.

Will this affect final drive or ratio?

No, the tooth counts and 0.8M pitch match the original design so the intent is maintenance and durability rather than changing gear ratios.

How does the material choice help performance?

7075-T6 aluminium provides higher strength and, with a hard anodize finish, reduces surface wear to help maintain mesh and reliability under hobby use.

Where is the part number referenced?

Reference MGO1200A when ordering or checking compatibility to ensure you receive the correct 7075 diff case and idler gear set. Write Product Review Please sign in your account before you can write any review.

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.

SKU: MGO1200A