GPM Racing Hardened Steel+Aluminum Front/Rear Adjustable CVD Drive Shaft+Aluminum 7075-T6 Hex Adapter+Wheel Lock (Suitable For+20mm Widening Kit) for Traxxas 1/10 MAXX (TXMS143F/RSN)

Adjustable CVD drive shaft kit for MAXX

The kit replaces stock cross-pin drives with adjustable constant velocity swing joints to improve driveline load transfer on 1/10 TRAXXAS MAXX platforms. Each joint pairs a hardened steel coupling with a 6061-T6 alloy body to preserve torsional stiffness while limiting weight gain. The shaft profile increases axle diameter from 6mm to 8mm to better resist bending under widened track loads, and the length adjustability allows precise suspension setup.

Supplied components include precision 7075-T6 aluminium hex adapters and wheel locks sized for the larger shaft, plus 8x16x5 bearings that match the revised dimensions. The kit is configured for use on either front or rear drive shafts and wheel mounting for MAXX builds using +20mm widening kits.

Packing includes

• CVD - 2pcs
• Aluminium 7075-T6 hex adapter - 2pcs
• Aluminium 7075-T6 wheel lock - 2pcs
• Set screws 5x5 - 2pcs
• 8x16x5 Bearing - 2pcs
• 2.5x14.8 Pin - 2pcs
• M4x2.5x17 Screw Ppn - 2pcs

Original Name / Part No:

8950,8956

Compatible Models

• TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
• TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4

For precision-minded builders upgrading a MAXX to a wider track, this kit provides thicker 8mm axles, hardened swing joints and 7075-T6 hex hardware to improve load handling and allow fine driveline length tuning.

What vehicles are covered by the compatibility list?

Compatibility is shown in the compatible models box and covers the listed TRAXXAS 1/10 MAXX variants; this kit is intended for installations that adopt +20mm widening hardware.

Which materials are used for the critical components?

The joints use hardened steel with a 6061-T6 alloy body, and the hex adapters and wheel locks are produced from 7075-T6 aluminium; bearings provided are 8x16x5.

Does the package include everything needed for the larger axle fitment?

Yes, the packing contains the CVDs, 7075-T6 hex adapters, wheel locks, the listed fasteners and 8x16x5 bearings required to accommodate the 8mm axle conversion. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.