GPM Racing Medium Carbon Steel+6061 Alloy Front Driveshaft Assembly with 6 Mm Axle for Traxxas 1/10 Ford F-150 Raptor R-101076-4 (FR102F)

Engineered front driveshaft assemblies for TRAXXAS 1/10

This front driveshaft assembly is engineered for TRAXXAS 1/10 platforms and uses a CNC-friendly design approach combining 6061 aluminium alloy components with medium carbon steel in a constant velocity configuration. The matched pair and supplied screw pins are intended to deliver repeatable spline engagement, controlled rotational mass, and straightforward serviceability for aftermarket driveline upgrades.

Replacement involves the front driveshaft elements listed in the compatibility box below. Confirm axle diameter before installation: the kit targets 6mm axle variants while several compatibility entries are 5mm and indicate the #9080 upgrade option. Fitment requires correct seating of the supplied screw pins and inspection of spline clearance during initial bench testing and a short break-in run.

The assembly is supplied as a modular upgrade or repair component to enhance driveline durability and predictable behaviour under typical RC operating conditions.

Packing includes

• Front Driveshaft Assembly - 2pcs
• Screw Pin 4x2.5x13 - 2pcs

Original Name / Part No:

9051

Compatible Models

• TRAXXAS 1/10 FORD F-150 RAPTOR R-101076-4
• TRAXXAS 1/10 Rustler 4X4 Brushless -67164-4
• TRAXXAS 1/10 Rustler 4X4 VXL-67376-4
• TRAXXAS 1/10 Slash 4X4 Brushless-68154-4
• TRAXXAS 1/10 Stampede 4X4 Brushless-67154-4
• TRAXXAS 1/10 Stampede 4X4 VXL-90376-4
• The following model types below are 5MM axle (for use with #9080 upgrade kit)
• TRAXXAS 1/10 4WD HOSS 4X4 VXL 3S-90076-4
• TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
• TRAXXAS 1/10 Rustler 4X4-67064-1
• TRAXXAS 1/10 Rustler 4X4-67064-61
• TRAXXAS 1/10 Slash 4X4 Ultimate-68077-4
• TRAXXAS 1/10 Slash 4X4 VXL-68086-4
• TRAXXAS 1/10 Slash 4X4-68054-1
• TRAXXAS 1/10 Slash 4X4-68054-61
• TRAXXAS 1/10 Slash 4X4 VXL-68286-4

Confirm axle size and spline engagement, then fit the supplied pins and perform an initial test run to validate clearance and operation on the supported TRAXXAS models.

What inspection steps are recommended before first run?

Verify axle diameter, check spline faces for burrs, ensure the screw pins seat fully, and confirm free rotation with no binding before test driving.

How does the material choice affect performance?

Using 6061 aluminium for rotating components lowers mass while medium carbon steel sections sustain torque loads, aiming to balance durability and rotational inertia for practical track and trail use.

Are there recommended maintenance checks?

Periodically inspect pin retention, spline wear, and any signs of corrosion on the medium carbon steel parts; replace pins if they show deformation or wear.

What upgrade route is available for 5mm axle models?

Some compatibility entries list 5mm axles and reference the #9080 upgrade kit as the conversion path for correct fitment; consult the compatibility list above before proceeding. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.