GPM Racing Medium Carbon Steel+6061 Alloy Rear Driveshaft Assembly with 6 Mm Axle for Traxxas 1/10 Ford F-150 Raptor R-101076-4 (FR106R)

Precision rear driveshaft for TRAXXAS 1/10 platforms

This rear driveshaft assembly is specified for select TRAXXAS 1/10 vehicles and is identified as FR106R. The assembly combines 6061 aluminium alloy components with medium carbon steel elements in a constant-velocity configuration to manage rotating mass while improving drivetrain engagement versus stamped or plastic shafts.

Engineered for the rear drive shaft area, the component uses a 6 mm axle on the principal compatible models listed below. The CVD geometry provides steadier torque transfer during acceleration and suspension articulation, delivering a balance of improved durability and reduced drivetrain lash for Slash, Stampede, Rustler and Ford F-150 Raptor chassis variants.

Service notes: replace the rear driveshaft assembly in the rear drive shaft area, verify axle diameter before installation, and secure original screw pins and retaining hardware to recommended torque. Certain TRAXXAS 4x4 variants indicated below use 5 mm axles and require the #9080 upgrade kit to adapt this assembly.

Packing includes

• Rear Driveshaft Assembly - 2pcs
• Screw Pin 4x2.5x13 - 2pcs

Original Name / Part No:

9052

Compatible Models

• TRAXXAS 1/10 FORD F-150 RAPTOR R-101076-4
• TRAXXAS 1/10 Rustler 4X4 Brushless -67164-4
• TRAXXAS 1/10 Rustler 4X4 VXL-67376-4
• TRAXXAS 1/10 Slash 4X4 Brushless-68154-4
• TRAXXAS 1/10 Stampede 4X4 Brushless-67154-4
• TRAXXAS 1/10 Stampede 4X4 VXL-90376-4
• The following model types below are 5MM axle (for use with #9080 upgrade kit)
• TRAXXAS 1/10 4WD HOSS 4X4 VXL 3S-90076-4
• TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
• TRAXXAS 1/10 Rustler 4X4-67064-1
• TRAXXAS 1/10 Rustler 4X4-67064-61
• TRAXXAS 1/10 Slash 4X4 Ultimate-68077-4
• TRAXXAS 1/10 Slash 4X4 VXL-68086-4
• TRAXXAS 1/10 Slash 4X4-68054-1
• TRAXXAS 1/10 Slash 4X4-68054-61
• TRAXXAS 1/10 Slash 4X4 VXL-68286-4

For precision-minded RC users requiring a lower-inertia rear shaft with dependable CVD behaviour, FR106R is a practical upgrade; verify axle diameter and use the #9080 adaptor for 5 mm variants.

What measurements confirm correct fitment?

Measure the axle journal diameter and compare with the compatible list; the specified 6 mm models are listed at the top of the compatibility box.

How does material selection affect fatigue life?

6061 alloy provides a good strength-to-weight ratio while the medium carbon steel components handle spline and load-bearing interfaces, together extending usable life under typical hobby duty cycles.

Is the #9080 adapter necessary for some models?

Yes, models identified as 5MM axle in the compatibility list require the #9080 upgrade kit to safely adapt this 6mm driveshaft assembly. Write Product Review Please sign in your account before you can write any review. Sign In Close

Made to order: GPM Racing parts are shipped to us from GPM's factory, so please allow around 14 days for dispatch.